The Great Dragon Lamps

They are the largest I've made, just shy of 2 feet long and are a feat of engineering.  There is a system to lower them into the kiln without breaking. And they pretty much have to just sit in place while glazing.

Raw clay is about 20#, finished product with glaze come close to 25#.  Right now they range from $300 to $500, but the half size is $150- $200.  I don't bring the massive dragons to all shows; usually only indoor places where I know the display will be stable.

 

The Celtic suff

 By "Celtic", by and large I mean Irish or Irish inspired, unless otherwise noted.

I people love these crosses and I've had more than one customer buy one after traveling to Ireland.  Which baffled me, until I too went there.  Then the reality of luggage limits hit you.  Every trip I'm mailing myself back books and sundry things a couple days before my flight; it is usually cheaper than buying more luggage space.  Shipping back pottery or stone would be a nightmare.

Mar sin e...

I made a series inspired by the Book of Kells.  Which sounds exciting until one encounters all the people who love Celtic/Irish things but have never heard of the Book of Kells.  I ndáiríre? So here I am all pleased with myself I can make knots freehand without tracing or copying, while the customer nods, blankly.  As long as they sell....

Fish with freeform spirals and design work, inspired by salmon and trout.

Christmas 2021 at the Market

 

This was my last time selling at PSM.  I don't know when or if I'll be back.  Several problematic issues have been on going, but the most immediate is mismanagement, specifically the failure to offer storage back after sabbatical as stated in documentation.  Without storage I cannot sell.  

I will not say more at the moment.  Persons still spreading unfounded rumors or  personal information without consent are cautioned against doing so, especially if they are in positions of responsibility. 

Cad atá oraibh? Ná bí amaideach...   

Customers can find my at recent shows listed.

Recent lamps

 

More recent than this blog, anyway.  

The white wolves always sell out.  As do most of the snow dragons. Gothic Dragons however depend on the crowd.  Lots of complements, but not all find a home, faraor.

Dragon Mascot Project pt2: Buckram

Well, I didn't get the mascot done in time for opening weekend, but I learned something:  buckram takes a while to dry.

Now all you hatters out there are probably laughing at me, but you have to understand, when I say a while, I mean, because of the nature of the 3d frame, number of pieces and overlap, a day for each step.  If I had known this I'd have planned my work flow better.  As it was, I started adding buckram bits Monday before opening.  Uh huh. 

So yes, procrastinating artist person learns the hard way it's going to take more time.  But at least it goes smoothly.  These are the steps I used:

1: stare at dragon frame part to be covered and imagine the most efficient shape to deform..square, triangle, strip, etc.
2: Guestimate the size needed and cut it out from the roll of buckram.  I bought a yard, in a 60" wide bolt, turned out to be more than enough.  
3: soak piece in a large bowl of water nearby.  I worked in a  garage, where I was free to squeeze  water directly on the floor/ground.  Soak at least a minute or two but no longer than 5 or you risk most of the starch washing out.
4:Take piece out of water and gently squeeze out excess.
5: This might be optional for some people, but I liked to gently pull and deform the buckram before draping. It seemed to get the starch working better.
6: Drap buckram over designated area, tucking around edged of frame where you can.  Use gravity to your advantage.  I needed to do the lower jaw setting the frame temporarily upside down or I would have had a dragon pelican.  Some place might need sewing straight pins to tack edges until the buckram is mostly dry.  Gently press down where pieces over lap.
7: Leave it to dry; with practice you'll know how many multiple wet pieces you can get away with at a time.  
8: 15 minutes to a half hour later depending on temp and humidity, check edges to see if they're pulling or popping up.  I think tension in the fabric can do this.  Luckily by now the starch is tackier and stronger.  Just gently press the buckram back in place and it should stick. 
9: when the buckram is half dry, remove pins used.
10: 12 to 24 hours later(often over night), the buckram is dry or mostly dry, and the next peices are ready to be added.

half finished

finished: took about 5-6 days

Next: finish 3d canvas with gesso primer.

Opening Weekend 2013

Great space and expect it to be a great season.  Thanks for everyone who showed up!

Booth:

New Incense Burners:  I've added a bit of a base to the top piece, for a better aesthetic:

bone/white $25; glazed $28; gryphons $28

Mountains dragon lairs are new:

lairs $18

Lamps:

Dragons: new process.  I'm casting the glass eyes now.  It's interesting and creatives, etc, etc, but I don't have a choice; all suppliers of glass "gems", blobs, whatever you want to call them have stopped.  Cold.  As of sometime last year.  My supplier is literally down to the ast dregs and I realized if I didn't find a production solution I was screwed for dragon eyes.   So I set about learning to cast glass frit.  Look for a blog soonish. 

Dragon Lamps vary: $48 +; green lamp shown $58

Spirit Trees: new process, I'm testing casting and fusing glass on the piece.  So far I like the effect, but must be careful with mixing glass of different coefficients.  The small cast pieces will crack if they're fused to the glaze of the tree.  So for those scarp glass pieces I'll need to stick with epoxy to attach them to the trees.

Spirit Trees: lg $48    sm $38

Candle burners: Leaf Lights new

Leaf Lights$40-$48

I'm very pleased with this effect, thought I clearly need to master photographing it!

Elven Vases, bowls, leaves:  These pieces were made by a member of Mud Spinner's Pottery, who sold at the Market in the late 90s.  We shared a group studio and often bisque pieces were thrown out that the artist just didn't like.  Or had some other tiny flaw.  I've kept them for years, with the idea of decorating them in some inspired way.  After watching the recent Hobbit film, by Lord of the Rings geekdom resurfaced and I decided to decorate them in tengwar , Tolkien's elven script.  

vase $58

The vase has the first part of an elven hymn to Varda, their goddess of the stars.  The small bowl with leaves is a Lothlorien theme, with mallorn leaves, nuts and flowers.  The yellow glaze fired darker than it should have, but apart from that I'm pleased.  The vase if 100% functional, but because of the decorative techniques(mix of glaze and oxide on a high fire body only fired to midrange) I can't recommend the bowls for food safe functionality(mixing batter, cereal,etc).  Used as a fruit bowl, or other dry storage is fine.

The leaf charms are inspired by mallorn and ivy.

Come see us soon!

Galu!

Dragon Mascot Project pt 1: frames

Back in 1998 I'd planned to make a dragon mascot for my booth, complete with wings and glowing eyes.  One thing derailed another and I never finished it, though I saved the half made head, semi forgotten and only unearthed recently during the Great Storage Move of 2012.  

After Christmas, I set about finishing the frame.  I decided against wings for right now, but added ears, horns, and the rest of the neck.  My original plan had been to cover the frame is black ducktape and maybe plaster or acrylic.  Then paint.  But then I heard of the glories of buckram.

Buckram is a canvas type of material impregnated with starch, traditionally used by hatters.  Wet it, and it can be formed over molds, drying in whatever form.   This sounded perfect, in theory making a 3d canvas I could gesso and paint with acrylic.   In fact, it was learning of this material that made returning to finish the dragon  mascot sound likely to produce and elegant result, with excellent work flow.  Thus inspired the frames almost finished themselves:

Next: Buckram